Convert 748 bytes/second to bits/second

748 byte/second = 5984 bit/second

All values are rounded to the nearest significant figure for display purposes.

Conversion Process

This conversion uses Bit per Second as the base unit. We'll first convert byte/second to Bit per Second, then convert from Bit per Second to bit/second.

Step 1: Convert from byte/second to Bit per Second

748 × 8 = 5984

Result: 5984 Bit per Second

Step 2: Convert from Bit per Second to bit/second

5984 × 1 = 5984

Result: 5984 bit/second

Direct Conversion Factor

748 × 8 = 5984

Direct conversion: 748 byte/second = 5984 bit/second

Frequently Asked Questions

  • How many bits/second are in 748 bytes/second?

    There are 5984 bits/second in 748 bytes/second.

  • What is 748 bytes/second in bits/second?

    748 bytes/second is equal to 5984 bits/second. To perform this conversion yourself using the convention, multiply 748 by 8.

  • How to convert 748 bytes/second to bits/second?

    To convert 748 bytes/second to bits/second using the convention, multiply 748 by 8. This gives you 5984 bits/second.

  • What is the formula to convert bytes/second to bits/second?

    The formula to convert from bytes/second to bits/second using the convention is: bits/second = bytes/second × 8. Using this formula, 748 bytes/second equals 5984 bits/second.

  • What is the difference between bytes/second and bits/second?

    The main difference between bytes/second and bits/second is that 1 bytes/second equals 8 bits/second using the convention. Note that data storage units commonly use two conventions: the decimal (SI) based on powers of 1000 (kB, MB, GB, etc.) and the binary (IEC) based on powers of 1024 (KiB, MiB, GiB, etc.). This calculator uses the convention.

  • Is bytes/second bigger than bits/second?

    byte/second is larger than bit/second. Specifically, using the convention, 1 bytes/second equals 8 bits/second.

  • Why is there confusion between KB and KiB, MB and MiB, etc.?

    Historically, "kilobyte" (KB) was often used informally to mean 1024 bytes (2^10). However, the SI prefix "kilo" officially means 1000 (10^3). This led to confusion. The IEC introduced binary prefixes like kibibyte (KiB) specifically for 1024 bytes, mebibyte (MiB) for 1024 KiB, etc., to provide clarity. SI prefixes (kB, MB, GB) are now correctly used for powers of 1000, while IEC prefixes (KiB, MiB, GiB) are used for powers of 1024.

  • What is the difference between bits and bytes?

    A bit is the smallest unit of data, representing a binary value of either 0 or 1. A byte is a common unit of digital information that consists of 8 bits. Data storage capacity is typically measured in bytes and their larger multiples.