Convert 66800 bits/second to bytes/second

66800 bit/second = 8350 byte/second

All values are rounded to the nearest significant figure for display purposes.

Conversion Process

This conversion uses Bit per Second as the base unit. We'll first convert bit/second to Bit per Second, then convert from Bit per Second to byte/second.

Step 1: Convert from bit/second to Bit per Second

66800 × 1 = 66800

Result: 66800 Bit per Second

Step 2: Convert from Bit per Second to byte/second

66800 × 0.125 = 8350

Result: 8350 byte/second

Direct Conversion Factor

66800 ÷ 8 = 8350

Direct conversion: 66800 bit/second = 8350 byte/second

Frequently Asked Questions

  • How many bytes/second are in 66800 bits/second?

    There are 8350 bytes/second in 66800 bits/second.

  • What is 66800 bits/second in bytes/second?

    66800 bits/second is equal to 8350 bytes/second. To perform this conversion yourself using the convention, multiply 66800 by 0.125.

  • How to convert 66800 bits/second to bytes/second?

    To convert 66800 bits/second to bytes/second using the convention, multiply 66800 by 0.125. This gives you 8350 bytes/second.

  • What is the formula to convert bits/second to bytes/second?

    The formula to convert from bits/second to bytes/second using the convention is: bytes/second = bits/second × 0.125. Using this formula, 66800 bits/second equals 8350 bytes/second.

  • What is the difference between bits/second and bytes/second?

    The main difference between bits/second and bytes/second is that 1 bits/second equals 0.125 bytes/second using the convention. Note that data storage units commonly use two conventions: the decimal (SI) based on powers of 1000 (kB, MB, GB, etc.) and the binary (IEC) based on powers of 1024 (KiB, MiB, GiB, etc.). This calculator uses the convention.

  • Is bits/second bigger than bytes/second?

    byte/second is larger than bit/second. Specifically, using the convention, 1 bits/second equals 0.125 bytes/second.

  • Why is there confusion between KB and KiB, MB and MiB, etc.?

    Historically, "kilobyte" (KB) was often used informally to mean 1024 bytes (2^10). However, the SI prefix "kilo" officially means 1000 (10^3). This led to confusion. The IEC introduced binary prefixes like kibibyte (KiB) specifically for 1024 bytes, mebibyte (MiB) for 1024 KiB, etc., to provide clarity. SI prefixes (kB, MB, GB) are now correctly used for powers of 1000, while IEC prefixes (KiB, MiB, GiB) are used for powers of 1024.

  • What is the difference between bits and bytes?

    A bit is the smallest unit of data, representing a binary value of either 0 or 1. A byte is a common unit of digital information that consists of 8 bits. Data storage capacity is typically measured in bytes and their larger multiples.