Convert 37363 bits/second to bytes/second

37363 bit/second = 4670 byte/second

All values are rounded to the nearest significant figure for display purposes.

Conversion Process

This conversion uses Bit per Second as the base unit. We'll first convert bit/second to Bit per Second, then convert from Bit per Second to byte/second.

Step 1: Convert from bit/second to Bit per Second

37363 × 1 = 37363

Result: 37363 Bit per Second

Step 2: Convert from Bit per Second to byte/second

37363 × 0.125 = 4670

Result: 4670 byte/second

Direct Conversion Factor

37363 ÷ 8 = 4670

Direct conversion: 37363 bit/second = 4670 byte/second

Frequently Asked Questions

  • How many bytes/second are in 37363 bits/second?

    There are 4670 bytes/second in 37363 bits/second.

  • What is 37363 bits/second in bytes/second?

    37363 bits/second is equal to 4670 bytes/second. To perform this conversion yourself using the convention, multiply 37363 by 0.125.

  • How to convert 37363 bits/second to bytes/second?

    To convert 37363 bits/second to bytes/second using the convention, multiply 37363 by 0.125. This gives you 4670 bytes/second.

  • What is the formula to convert bits/second to bytes/second?

    The formula to convert from bits/second to bytes/second using the convention is: bytes/second = bits/second × 0.125. Using this formula, 37363 bits/second equals 4670 bytes/second.

  • What is the difference between bits/second and bytes/second?

    The main difference between bits/second and bytes/second is that 1 bits/second equals 0.125 bytes/second using the convention. Note that data storage units commonly use two conventions: the decimal (SI) based on powers of 1000 (kB, MB, GB, etc.) and the binary (IEC) based on powers of 1024 (KiB, MiB, GiB, etc.). This calculator uses the convention.

  • Is bits/second bigger than bytes/second?

    byte/second is larger than bit/second. Specifically, using the convention, 1 bits/second equals 0.125 bytes/second.

  • Why is there confusion between KB and KiB, MB and MiB, etc.?

    Historically, "kilobyte" (KB) was often used informally to mean 1024 bytes (2^10). However, the SI prefix "kilo" officially means 1000 (10^3). This led to confusion. The IEC introduced binary prefixes like kibibyte (KiB) specifically for 1024 bytes, mebibyte (MiB) for 1024 KiB, etc., to provide clarity. SI prefixes (kB, MB, GB) are now correctly used for powers of 1000, while IEC prefixes (KiB, MiB, GiB) are used for powers of 1024.

  • What is the difference between bits and bytes?

    A bit is the smallest unit of data, representing a binary value of either 0 or 1. A byte is a common unit of digital information that consists of 8 bits. Data storage capacity is typically measured in bytes and their larger multiples.