Convert 13360 bits/second to bytes/second

13360 bit/second = 1670 byte/second

All values are rounded to the nearest significant figure for display purposes.

Conversion Process

This conversion uses Bit per Second as the base unit. We'll first convert bit/second to Bit per Second, then convert from Bit per Second to byte/second.

Step 1: Convert from bit/second to Bit per Second

13360 × 1 = 13360

Result: 13360 Bit per Second

Step 2: Convert from Bit per Second to byte/second

13360 × 0.125 = 1670

Result: 1670 byte/second

Direct Conversion Factor

13360 ÷ 8 = 1670

Direct conversion: 13360 bit/second = 1670 byte/second

Frequently Asked Questions

  • How many bytes/second are in 13360 bits/second?

    There are 1670 bytes/second in 13360 bits/second.

  • What is 13360 bits/second in bytes/second?

    13360 bits/second is equal to 1670 bytes/second. To perform this conversion yourself using the convention, multiply 13360 by 0.125.

  • How to convert 13360 bits/second to bytes/second?

    To convert 13360 bits/second to bytes/second using the convention, multiply 13360 by 0.125. This gives you 1670 bytes/second.

  • What is the formula to convert bits/second to bytes/second?

    The formula to convert from bits/second to bytes/second using the convention is: bytes/second = bits/second × 0.125. Using this formula, 13360 bits/second equals 1670 bytes/second.

  • What is the difference between bits/second and bytes/second?

    The main difference between bits/second and bytes/second is that 1 bits/second equals 0.125 bytes/second using the convention. Note that data storage units commonly use two conventions: the decimal (SI) based on powers of 1000 (kB, MB, GB, etc.) and the binary (IEC) based on powers of 1024 (KiB, MiB, GiB, etc.). This calculator uses the convention.

  • Is bits/second bigger than bytes/second?

    byte/second is larger than bit/second. Specifically, using the convention, 1 bits/second equals 0.125 bytes/second.

  • Why is there confusion between KB and KiB, MB and MiB, etc.?

    Historically, "kilobyte" (KB) was often used informally to mean 1024 bytes (2^10). However, the SI prefix "kilo" officially means 1000 (10^3). This led to confusion. The IEC introduced binary prefixes like kibibyte (KiB) specifically for 1024 bytes, mebibyte (MiB) for 1024 KiB, etc., to provide clarity. SI prefixes (kB, MB, GB) are now correctly used for powers of 1000, while IEC prefixes (KiB, MiB, GiB) are used for powers of 1024.

  • What is the difference between bits and bytes?

    A bit is the smallest unit of data, representing a binary value of either 0 or 1. A byte is a common unit of digital information that consists of 8 bits. Data storage capacity is typically measured in bytes and their larger multiples.